BCM Resources Corp.: Exploration Update-Shan South Molybdenum Property, Terrace, B.C.

VANCOUVER, BRITISH COLUMBIA -- (Marketwire - Nov. 16, 2011) - BCM Resources Corporation (TSX VENTURE:B), the "Company", announces the final results from the Phase 3 drilling program which commenced mid-June 2011 and was completed mid-August. The program consisted of 13 inclined and three vertical holes totaling 3,366.4 meters at the South Shan Molybdenum discovery near Terrace BC. Drilling at Shan South to date totals 12,598 meters.

The program had two main objectives, the first being to better define and extend the Las Margaritas deposit and the second to explore the surrounding area for possible faulted-off extensions or for separate but similar areas of mineralization.

Seven of the sixteen holes drilled during the recent program were directed to the Las Margaritas deposit, and all of these intersected the molybdenum-bearing zone.

Holes LM043 to 046 and LM052 to 054 were infill holes designed to test the continuity of mineralization within the Las Margaritas deposit. These returned anticipated widths and grades with the best intersection being 0.064% Mo over 189 meters in hole LM054, beginning at a hole depth of 18 meters.

Hole LM052 is the most westerly hole drilled to date on the known deposit. The hole passed through a zone of alternating granodiorite and volcanics and includes a significant fault zone with mineralization on both sides of the fault. The occurrence of mineralization on both sides of the fault may indicate potential for extending the deposit to the north and/or west of this drill hole.

The Las Margaritas deposit remains open at depth and is also open to the west where it encounters a major northwest-trending fault. At a minimum, a further seven holes are proposed to test these areas to a vertical depth of about 400 meters.

Known molybdenum mineralization is strongest within the granodiorite adjacent to the contact with volcanic rocks. Exploration drilling outside of the known limits of the Las Margaritas zone was therefore directed towards similar contact areas. Within the present area of interest, the contact runs approximately east-west with the volcanics being to the south. The contact is cut and offset by steeply-dipping northeast and northwest-trending faults.

Holes LM048 and 049, collared directly east of the known deposit, were inclined holes drilled in a southerly direction to intersect the contact area. Although the contact area was intersected, significant mineralization was not encountered. The contact in both these holes was intersected sooner than expected and future drill holes will be collared further north in order to more adequately test the granodiorite adjacent to the contact.

Two vertical holes, LM057 and LM058, were drilled to the west of known mineralization and separated from it by a significant fault zone. Both holes were entirely within granodiorite adjacent to the contact with volcanic rocks. These holes encountered no mineralization and the granitic rocks were relatively fresh and unaltered.

North of the Las Margaritas deposit, holes LM 050 and 051 were collared within volcanics and drilled in a northerly direction. These holes did not intersect the contact zone or encounter mineralization.

Hole LM047 was collared approximately 1000 meters to the northeast of the Las Margaritas Zone, near the old adit portal. This inclined hole was drilled in a southeasterly direction and did not intersect Mo mineralization but featured moderate to strong potassium feldspar alteration of granodiorite throughout most of its length. Hole LM055 and LM056, collared further to the southeast featured similar potassium feldspar alteration but no molybdenum values.


Shan South Property
2011 Diamond Drilling

         EASTING  NORTHING  ELEVATION  AZIMUTH  INCLINATION
HOLE ID      UTM       UTM     Meters  degrees      Degrees
LM043     536192 	6058286 	924.5 	100 	-46
LM044     536198 	6058269 	925.5 	186 	-45
LM045     536060 	6058275 	983 	181 	-46
LM046     536060 	6058275 	983 	183 	-61
LM047     536717 	6059395 	475 	155 	-45
LM048     536338 	6058303 	896 	179 	-46
LM049     536558 	6058289 	887 	180 	-46
LM050     535773 	6058852 	938 	7 	-46
LM051     535560 	6058842 	960 	9 	-46
LM052     535691 	6058401 	1055 	185 	-46
LM053     535922 	6058283 	995 	185 	-45
LM054     535922 	6058283 	995 	185 	-60
LM055     537058 	6059205 	585 	160 	-44
LM056     537058 	6059205 	585 	N/A 	-90
LM057     535278 	6058084 	1112 	2 	-89
LM058     534610 	6058257 	1275 	9 	-88

Drill holes not specifically reported did not return significant molybdenum values.
Significant Intervals were as follows:

DDH            From        To      Length       Mo
                 (m)       (m)         (m)      (%)
LM043 	27 		39 		12.0 		0.043 	
	84 		96 		12.0 		0.086 	
								
LM044 	5 		63 		58.0 		0.06 	
  including 	36 		51 		15.0 		0.185 	
  and 	42 		54 		12.0 		0.209 	
								
LM045 	9 		21 		12.0 		0.049 	
	57 		96 		39.0 		0.038 	
  including 	57 		81 		24.0 		0.048 	
	and 	57 		69 		12.0 		0.06 	
								
LM046 	1 		102 		101.0 		0.053 	
  including 	27 		81 		54.0 		0.072 	
  and 	57 		81 		24.0 		0.118 	
	93 		105 		12.0 		0.081 	
  including 	96 		102 		6.0 		0.14 	
								
LM046 	159 		171 		12.0 		0.03 	
								
LM052 	1 		87 		86 		0.033 	
  including 	54 		87 		33 		0.058 	
								
LM053 	4.5 		168 		163.5 		0.060 	
  including 	24 		45 		21 		0.114 	
	and 	132 		144 		12 		0.133 	
								
LM054 	18 		207 		189 		0.064 	
  including 	18 		60 		42 		0.119 	
  including 	39 		60 		21 		0.150 	
  including 	144 		156 		12 		0.113

SAMPLE QUALITY ASSURANCE AND CONTROL

All drill core recovered from the Phase 3 program was logged and sampled in 3 meter intervals. Sample intervals were split in half using a mechanical core splitter at the Company's core handling warehouse in downtown Terrace. One half of the sample interval was retained as a permanent record with the other half submitted to AGAT Laboratories' sample preparation lab housed in an adjacent building. Prepared sample pulps were forwarded to AGAT Laboratories analytical facilities in Mississauga Ontario for the determination of Mo and 42 additional major and trace elements by ICP.

Quality control was maintained by the insertion of sample blanks, standards and core duplicates into the sample stream during the sampling program.


QUALIFIED PERSONS

The summer 2011 exploration program was supervised by Jim Hutter, P.Geo., a geologist with 35 years experience in British Columbia, Geological Consultant to BCM Resources and a Qualified Person as defined by NI 43-101,consultant to the Company.

The technical content of this news release has been reviewed by N.C. Carter Ph.D, P.Eng., Geological Advisor to BCM Resources Corp., and a Qualified Person as defined by National Instrument 43-101.


About BCM Resources Corporation

BCM Resources Corp. is a Vancouver-based mineral exploration company, dedicated to advancing its Shan South molybdenum discovery into an economic deposit. Additionally, the Company has a significant land package of 100% owned mineral claims comprising another five, highly-prospective, molybdenum and other base & precious metals exploration properties located near Terrace, B.C.


On Behalf of the Board of Directors:

Dale McClanaghan
President & CEO



Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.



Contact

BCM Resources Corporation
Dale McClanaghan, President & CEO
(604) 646-0144 ext. 224

BCM Resources Corporation
Deborah Goldbloom
(604) 646-0144 ext. 223
Toll Free: (888) 646-0144 ext. 223
info@bcmresources.com
www.bcmresources.com