Sparton Reports Positive Sampling Results From China Vanadium Project Values Up to 2% Vanadium OxideBase Metal and Silver Values FoundNew Drilling Program Underway

TORONTO, ONTARIO -- (Marketwire) -- 03/15/11 -- Sparton Resources Inc. (TSX VENTURE: SRI) ('Sparton' or the 'Company'), announced today that it has received very positive results from the initial surface sampling program completed on its Rentian Vanadium Project in Jiangxi Province, Peoples Republic of China . See Sparton news release dated December 2, 2010.

The Company's vanadium projects are held by VanSpar Mining Inc. a newly incorporated British Virgin Island ('BVI') subsidiary company that holds Sparton's various vanadium rights and assets in China, including Rentian and the nearby Guojiaping project. VanSpar is 74.2% percent owned by Sparton. See Sparton news release dated March 10, 2011.

As part of its ongoing due diligence study of the Rentian Mining Licence and processing plant the Company's technical staff have completed a comprehensive surface sampling program as well as a review of the Rentian processing plant operating systems and infrastructure. The sampling results are reported here.

RENTIAN SURFACE SAMPLING

Over 160 grab and chip samples were taken covering most of the vanadium unit rock exposures in the 1.6 square kilometre Rentian Mining Licence. There are no previous records of similar sampling and no previous drilling has been done to evaluate the vanadium rich stratigraphic unit which trends across the Licence. The sampling covered most of the 1.6 km strike length of the vanadium rich horizon on the Licence. Exposures are scattered and best exposed in several quarries where material has been excavated for local lime production. The vanadium rich unit appears to be approximately 30 metres thick, strikes northwest and dips gently 10-15 degrees to the northeast. Not all samples were actually taken in the vanadium rich unit due to lack of continuous exposure. Where continuous exposure was present continuous chip samples were taken, otherwise grab samples were collected.

RESULTS HIGHLIGHTS

The best continuous chip sample (1 metre sample intervals) returned an average of 1.10% V205 across a 24 metre wide sampled zone. Within this interval a 12 metre wide zone averaged 1.31% V2O5. The highest value in this zone was 2.00% V2O5 over a 1 metre interval. True thicknesses are estimated at 20 and 10 metres respectively for these intervals. Other continuous chip samples taken included 0.75% V2O5 over 12 metres (highest value 1.2%V2O5 over 1 metre) and 0.73% over 7 metres (highest value 1.24% V2O5 over 2 metres).

The average V2O5 content for the entire 162 sample group including mineralized and non mineralized zones was 0.43% V2O5 and approximately 20% of the samples assayed over 1% V2O5.

SIGNIFICANT BASE METAL AND SILVER VALUES FOUND

Of significant interest for the project is that significant amounts of copper, zinc and silver are associated with the vanadium mineralization. These were detected in a number of multi element and individual analyses done for the Quality Control program (see below). Values of 0.92% copper (with 0.79% V2O5), 0.53% copper (with 0.98% V2O5), 0.42% copper (with 1.06% V2O5), and 0.05% copper (with 1.2% V2O5 and 0.53% Zinc) were reported in these results.

Significant silver values were also associated with the higher grade vanadium results. These include 1 metre chip samples grading 39.9 grams silver per tonne with 1.66% V2O5, 23.1 grams per tonne silver with 1.21% V2O5, and 18.2 grams per tonne silver with 1.20% V2O5.

Only about 25% of the 162 samples have undergone multi element analyses and the overall base metal and silver distribution is considered incomplete with the current data available.

DRILL PROGRAM UNDERWAY

An 1100 metre drilling program using three drill rigs is now underway to test the down dip extension of the surface zones sampled in the work reported here. Approximately 1.2 kilometres of the1.6 kilometre strike length will be tested in 10-15 shallow holes to intersect the vanadium and base metal rich unit at depths of 25-75 metres. Holes will be approximately 150 metres apart and fill in drilling is planned once the geometry of the mineralized unit is better understood. This work is expected to take 6 weeks to complete.

QUALITY CONTROL PROGRAM

The surface sampling work followed industry standard methods for chain of custody, quality control and quality assurance. This included insertion of blank samples into the sample group at random intervals. The initial V205 assay results were reported by the Central Laboratory of Minerals Exploration and Development of Jiangxi Province located in the city of Nanchang. Duplicates of a selected group of samples (35) representing approximately 28% of the total, and variable V2O5 content were submitted to the SGS Tianjin Mineral Laboratory for multi element analyses and Vanadium analyses using the ICP90A technique. The Vanadium analyses reported by SGS were converted into V2O5 results using a standard formula. In addition several of the samples were analyzed at the Company laboratory in Lincang, Yunnan China.

Correlation of results between the laboratories was excellent with average positive or negative variances on individual sample results between laboratories of under 5.5%. This is considered acceptable.

DISCUSSION

The Company and Vanspar are extremely encouraged by these results. The indicated grades of over 1% V2O5 over wide widths at several locations is very positive. In addition the presence of significant base metal and silver values associated with the vanadium rich unit may have a revenue contribution to future project economics if this mineralization occurs over a large part of the Rentian Licence area and can be recovered. The two main exposures of copper, zinc, and silver rich material sampled are approximately 1.2 km apart, and the drill program will be used establish continuity between these exposures.

Future metallurgical testing on the drill core will involve flotation tests to determine recoverability of base metals and silver from the raw material prior to processing for vanadium recovery.

Additional results will be reported when available.

Sparton and VanSpar will be highlighting their Guojiaping and Rentian vanadium projects in China at the upcoming Mines and Money Conference in Hong Kong taking place from March 22-25.

Statements in this release that are forward-looking statements are subject to various risks and uncertainties concerning the specific factors disclosed under the heading 'Risk Factors' in the Company's filings with Canadian securities regulators. Such information contained herein represents management's best judgment as of the date hereof based on information currently available. The Company does not assume any obligation to update any forward-looking statements, save and except as may be required by applicable securities laws.

This news release and the information contained herein does not constitute an offer of securities for sale in the United States and securities may not be offered or sold in the United States absent registration or exemption from registration.

We Seek Safe Harbour.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Contacts:

Sparton Resources Inc.

A. Lee Barker

President and CEO

416-366-3551 or Mobile: 416-716-5762

416-366-7421 (FAX)
info@spartonres.ca


Sparton Resources Inc

Charles Ge

Director

86 10 8559 2276 or Mobile: 86 18670107777
charlesge@vip.163.com
www.spartonres.ca