Exeter Reports Progress on the Caspiche Stand-Alone Oxide Pre-Feasibility Study
VANCOUVER, BRITISH COLUMBIA -- (Marketwire) -- 03/15/11 -- Exeter Resource Corporation (NYSE Amex: XRA) (TSX: XRC) (FRANKFURT: EXB) ('Exeter' or the 'Company') is pleased to report on the progress of a stand-alone oxide ore pre-feasibility study ('PFS') that is expected to be completed in Q2 2011. The oxide ore PFS will be followed by the full project PFS in Q3-2011. The later PFS will include mining and leaching of the oxide material but on a far shorter timeline.
Highlights of the metallurgical program completed to date are as follows:
-- The oxide project contains 1.4 million ounces gold and 5.9 million
ounces silver(i) with a 0.3:1 waste to ore ratio.
-- The stand-alone oxide PFS will model a 35,000 metric tons/day valley-
fill heap leach operation to recover approximately 1.0 million ounces of
gold and 1.5 million ounces of silver over 8 years. Projected gold
production will be some 150,000 ounces/year in the early years,
decreasing to 120,000 ounces/year in later years.
-- A large scale column leaching program on oxide ore samples, involving 29
separate column tests provided data supporting heap leaching gold
recoveries of 70% to 75%, based on a 50mm (2 inch) crush size. Silver
recoveries averaged 25%.
-- A 40 metric ton pilot plant sample recently collected from various
mineralized sites within the oxide deposit indicated 70% of the mined
material may not need crushing as the material breaks naturally to
-50mm.
-- The column reagent consumptions averaged 1.5 kg/tonne sodium cyanide and
3 kg/tonne lime. Typically, heap leach operations consume approximately
40 to 65% of the cyanide consumed in column tests.
-- The PFS will provide capital and operating cost estimates for the
complete development of the oxide project. It is due to issue in Q2-
2011.
Exeter's Chairman, Yale Simpson stated 'our heap leaching simulations are providing very good recoveries for the oxide deposit that forms a gold-only blanket of mineralization overlying the main Caspiche gold-copper resource. As the oxide deposit must be removed to access the lower sulphide ores, we are encouraged that the potential exists for an economically viable stand-alone project, independent of the much larger oxide-sulphide project.
'Should the outcome of the oxide PFS study be positive, it will provide the option of moving immediately into detailed feasibility studies and mine permitting. This option could provide a far shorter timeline to production than the full oxide-sulphide project'.
Oxide Ore Treatment
The Caspiche deposit includes 100 million metric tons of shallow oxide ore containing 1.4 million ounces of gold with virtually no contained copper, allowing a simple treatment by cyanide leaching to be considered. Exeter is performing a PFS on a stand-alone valley-fill style heap leach operation processing 35,000 metric tons/day of ore at a waste to ore ratio of 0.3:1. Almost all the waste from this shallow open pit will be spread and compacted to line the heap leach valley-fill site prior to putting down an impermeable plastic liner.
Testwork at McClelland Laboratories of Sparks, Nevada, confirms that the ore type is very responsive to conventional heap leaching, with indicated column leach gold recoveries of 70% to 75% for ore crushed to 80% passing 50mm. The leach kinetics were rapid with 80% of the soluble gold generally leached within 30 days.
In all, McClelland received 5.5 metric tons of large diameter PQ core from 7 metallurgical drill holes which tested the extent and depth of the oxide zone. 11 composites made from this material were tested at 12.5mm (needing agglomeration), 25mm and 50mm, depending on the composite weight available.
The finer crush sizes provided more rapid kinetics, but because the overall gold recovery was not significantly greater than the 50mm crush, the latter was chosen as the optimum case. The coarser crush size has the advantage of not requiring agglomeration, a simpler crushing configuration, lower capital costs and lower energy requirements. The ore, at a 50 mm crush, can be placed directly on a plastic membrane without the need for a protective layer.
Cyanide consumption in the 50mm tests averaged 1.5 to 2.5 kg/tonne over the 100 to 130 day test period, however the planned leach cycle for pad construction will be 30 or possibly 40 days, and operational consumptions are expected to be well under 1.0 kg/tonne. Lime consumption averaged 3 to 4 kg/tonne.
Last month Exeter also tested a bulk sample from the oxide blanket to help in crushing plant design. Approximately 40 metric tons were excavated and sized at a Santiago laboratory. The results showed a natural breakage of the rock to 70% finer than 50mm. This breakage characteristic has the potential to significantly reduce the quantity of material requiring crushing.
Jacobs Engineering (formerly Aker Solutions) has determined that the water requirement for a 35,000 metric tons/day heap leach operation will be less than 100 litres/second. That requirement can be met by the recently optioned 300 litres/second of consumable water rights recently reported by the Company.
Jerry Perkins, Exeter's VP Development and Operations and a 'qualified person' within the definition of that term in National Instrument 43-101, Standards of Disclosure for Mineral Projects, has supervised the preparation of the technical information contained in this news release.
About Exeter
Exeter Resource Corporation is a Canadian mineral exploration company focused on the exploration and development of the Caspiche project in Chile. The project is situated in the Maricunga gold district, between the Refugio mine (Kinross Gold Corp.) and the giant Cerro Casale gold deposit (Barrick Gold Corp. and Kinross Gold Corp.). The discovery represents one of the largest mineral discoveries made in Chile in recent years. Exeter has initiated pre-feasibility studies with the aim of demonstrating the commercial viability of this world class discovery. The Company has cash reserves of $85 million and no debt.
(i)Oxide Mineral Resource Estimate (As Reported on September 13, 2010)
----------------------------------------------------------------------------
Million Gold Silver
Metric Gold (Million Silver (Million
Category Material(ii) Tonnes(Mt) (g/t) Ounces) (g/t) Ounces)
----------------------------------------------------------------------------
Measured
Indicated OXIDE 99 0.44 1.4 1.69 5.4
----------------------------------------------------------------------------
Inferred OXIDE 9 0.28 0.1 1.64 0.5
----------------------------------------------------------------------------
----------------------------------------------------------------------------
(iii)Gold
(iii)Gold Equivalent
Equivalent (Million
Category Material(ii) (g/t) Ounces)
----------------------------------------------------------------------------
Measured Indicated OXIDE 0.44 1.4
----------------------------------------------------------------------------
Inferred OXIDE 0.29 0.1
----------------------------------------------------------------------------
(ii)Oxide resources are reported above a marginal cutoff of 0.2 g/t gold-equivalence, sulphide resources are reported above a marginal cutoff of 0.3 g/t gold-equivalence.
(iii)AMEC chose to report the resource above a Au equivalent cutoff. For this they used prices of US$950/oz for Au and $2.30/lb for Cu. The formula used to calculate Au equivalence is Au(g/t) Cu (%) (i) (Cu Price ($/lb)/Au Price ($/oz))
You are invited to visit the Exeter web site at www.exeterresource.com.
EXETER RESOURCE CORPORATION
Bryce Roxburgh, President and CEO
Safe Harbour Statement - This news release contains 'forward-looking information' and 'forward-looking statements' (together, the 'forward-looking statements') within the meaning of applicable securities laws and the United States Private Securities Litigation Reform Act of 1995, the Company's belief as to the extent and timing of its PFS, drilling programs, various studies including engineering, environmental, infrastructure and other studies, and exploration results, budgets for its exploration programs, the potential tonnage, grades and content of deposits, timing, establishment and extent of resources estimates, potential for financing its activities, potential production from and viability of its properties, permitting submission, adequacy of water resources and timing and expected cash reserves. These forward-looking statements are made as of the date of this news release. Readers are cautioned not to place undue reliance on forward-looking statements, as there can be no assurance that the future circumstances, outcomes or results anticipated in or implied by such forward-looking statements will occur or that plans, intentions or expectations upon which the forward-looking statements are based will occur. While the Company has based these forward-looking statements on its expectations about future events as at the date that such statements were prepared, the statements are not a guarantee that such future events will occur and are subject to risks, uncertainties, assumptions and other factors which could cause events or outcomes to differ materially from those expressed or implied by such forward-looking statements. Such factors and assumptions include, among others, the effects of general economic conditions, the price of gold, silver and copper, changing foreign exchange rates and actions by government authorities, uncertainties associated with legal proceedings and negotiations and misjudgements in the course of preparing forward-looking information.
In addition, there are known and unknown risk factors which could cause the Company's actual results, performance or achievements to differ materially from any future results, performance or achievements expressed or implied by the forward-looking statements. Known risk factors include risks associated with the ability to obtain any necessary approvals, waivers, consents and other requirements necessary or desirable to permit or facilitate the proposed Arrangement, the risk that any applicable conditions of the proposed transaction may not be satisfied, risks associated with project development; the need for additional financing; operational risks associated with mining and mineral processing; fluctuations in metal prices; title matters; uncertainties and risks related to carrying on business in foreign countries; environmental liability claims and insurance; reliance on key personnel; the potential for conflicts of interest among certain officers, directors or promoters of the Company with certain other projects; the absence of dividends; currency fluctuations; competition; dilution; the volatility of the Company's common share price and volume; tax consequences to U.S. investors; and other risks and uncertainties, including those described in the Company's Annual Information Form for the financial year ended December 31, 2009, dated March 30, 2010 filed with the Canadian Securities Administrators and available at www.sedar.com. Although the Company has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described in forward-looking statements, there may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. There can be no assurance that forward-looking statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements. The Company is under no obligation to update or alter any forward-looking statements except as required under applicable securities laws.
Cautionary Note to United States Investors - The information contained herein and incorporated by reference herein has been prepared in accordance with the requirements of Canadian securities laws, which differ from the requirements of United States securities laws. In particular, the term 'resource' does not equate to the term 'reserve'. The Securities Exchange Commission's (the 'SEC') disclosure standards normally do not permit the inclusion of information concerning 'measured mineral resources', 'indicated mineral resources' or 'inferred mineral resources' or other descriptions of the amount of mineralization in mineral deposits that do not constitute 'reserves' by U.S., unless such information is required to be disclosed by the law of the Company's jurisdiction of incorporation or of a jurisdiction in which its securities are traded. U.S. investors should also understand that 'inferred mineral resources' have a great amount of uncertainty as to their existence and great uncertainty as to their economic and legal feasibility. Disclosure of 'contained ounces' is permitted disclosure under Canadian regulations; however, the SEC normally only permits issuers to report mineralization that does not constitute 'reserves' by SEC standards as in place tonnage and grade without reference to unit measures.
NEITHER THE TSX NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS NEWS RELEASE
Contacts:
Exeter Resource Corporation
B. Roxburgh
President
604.688.9592 or Toll Free: 1.888.688.9592
604.688.9532 (FAX)
Exeter Resource Corporation
Rob Grey
VP Corporate Communications
604.688.9592 or Toll Free: 1.888.688.9592
604.688.9532 (FAX)
Exeter Resource Corporation
Suite 1660, 999 West Hastings St.
Vancouver, BC Canada V6C 2W2
exeter@exeterresource.com