• Mittwoch, 25 Dezember 2024
  • 18:02 Uhr Frankfurt
  • 17:02 Uhr London
  • 12:02 Uhr New York
  • 12:02 Uhr Toronto
  • 09:02 Uhr Vancouver
  • 04:02 Uhr Sydney

Giant Mining Validates Copper-Bearing Breccia Zone with Core Hole MHB-31 at Majuba Hill Nevada

12.11.2024  |  The Newswire
VANCOUVER - Giant Mining Corp. (CSE: BFG | OTC: BFGFF | FWB: YW5) ("Giant Mining" or the "Company") has received final assay results for MHB-31 ("MHB-31") the second core hole drilled at its Majuba Hill ("Majuba Hill") Copper-Silver Porphyry Deposit located in Pershing County, Nevada. Hole MHB-31 drilled the marginal breccia around the high-grade copper-bearing breccia intersected by MHB-30. Hole MHB-31 was located over 600 feet (185 meters) to the east of MHB-30 and intersected the marginal breccia portion of the copper-bearing breccia as shown on Figures 1 and 2.


Click Image To View Full Size

Figure 1: Magmatic-Hydrothermal Breccia Corridors and Prominent Breccia Bodies

MHB-31 returned: 115 feet (35.1 meters) of 0.10% copper and 3 g/t silver from 769 to 884 feet (234.4-269.5 meters).

"This confirms breccia controls for the location and wide zones of copper and silver mineralization that was highlighted by the technical review completed before the 2024 drilling," said Buster Hunsaker, Consulting Geologist to Giant Mining Corp. "These results are consistent with the copper grade-domains outlined in the Exploration Target Model constructed by RESPEC in the 2023 NI43-101."


Click Image To View Full Size

Figure 2: Drone photo and Cross Section looking North

"With the validation of the Majuba Hill high-grade, copper-bearing breccia we are looking forward to the next phase of the 2024 drilling program," said David Greenway, CEO of Giant Mining. "This understanding will make our drilling programs more cost-effective as we develop the deposit's potential to become a significant domestic supply of copper for the USA and for the benefit of all Giant Mining stakeholders."

Copper mineralization in the "Breccia-Margin" zones of the high-grade, copper-bearing breccias is within limonitic-matrix breccias, tourmaline-bearing stockwork zones, and tourmaline-bearing fracture zones as shown in Figure 3. Typically, copper occurs as azurite, malachite, cuprite, and chalcocite.
Click Image To View Full Size

Figure 3: MHB-31 Copper in Breccia Margin with chalcocite and cuprite.

Left photo: includes 879-884 feet (267.9-269.4 m) with 0.44% Cu and 6.6 g/t Ag.

Right photo: includes 909-914 feet (277.1-278.6 m) with 0.70% Cu and 1.6 g/t Ag.

Quality Assurance/Quality Control ("QA/QC") Measures, Chain of Custody

The Company utilizes a QA/QC program using best industry practices at the Majuba Hill Project. The samples are placed in cloth or plastic sample bags and are transported from the Giant Mining secure warehouse or directly from Woods Process to the ALS Labs Sample Prep Facility in Elko, Nevada. ALS then transports the prepared pulps to their analytical lab in North Vancouver, B.C.

Drill core samples are cut lengthwise into two halves and one half is placed in labeled cloth sample bags. All samples are analyzed for copper, gold, silver, and 33 other elements. Gold is determined by ALS Labs method Au-AA23 which is a fire assay with an AAS finish on a 30-gram split. Copper, silver, and the remaining 31 elements are determined by ALS Labs method ME-ICP61 which is a four-acid digestion and ICP-AES assay. Approximately 10% of the submitted samples are drill duplicates and copper-gold-porphyry commercial standard reference material pulps. The sample rejects and remaining pulps will be retrieved from ALS Labs.

Qualified Person

The scientific and technical information contained in this news release has been reviewed and approved by E.L. "Buster" Hunsaker III, CPG 8137, a non-independent consulting geologist who is a "Qualified Person" as such term is defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43- 101").

About Giant Mining Corp.

Giant Mining Corp. is engaged in the identification, review and acquisition of latter stage copper and copper/silver/gold assets. This is in direct response to the growing worldwide demand and lack of supply for precious metals fueled by the Green New Deal in the US and most other developed nations with similar programs aimed at addressing climate change. Such programs are heavily reliant on silver, gold and especially copper to produce Electric Vehicles and other renewable power sources, as well as building infrastructure to provide clean and affordable electricity.

The flagship project is the Majuba Hill copper, silver and gold District located 156 miles (251 km) outside Reno, Nevada, USA. Management has been mandated to focus on safe, mining friendly jurisdictions where government regulations are supportive of mining operations.

Neither the Canadian Securities Exchange nor its Market Regulator (as that term is defined in the policies of the Canadian Securities Exchange) accepts responsibility for the adequacy or accuracy of this release.

On Behalf of the Board of Giant Mining Corp.

"David Greenway"

David C. Greenway

President & CEO

For further information, please contact:

E: info@giantminingcorp.com

P: 1 (604)-499-6791

VISIT OUR WEBSITE FOR MORE DETAILS

www.giantminingcorp.com

LIKE AND FOLLOW

Instagram, Facebook, Twitter, LinkedIn

DOWNLOAD INVESTOR INFORMATION


Click Here

Forward-Looking Statements

This news release contains certain statements that may be deemed "forward-looking" statements. Forward looking statements are statements that are not historical facts and are generally, but not always, identified by the words "expects", "plans", "anticipates", "believes", "intends", "estimates", "projects", "potential" and similar expressions, or that events or conditions "will", "would", "may", "could" or "should" occur. Although Giant Mining Corp. believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results may differ materially from those in forward looking statements. Forward looking statements are based on the beliefs, estimates and opinions of Giant Mining Corp. management on the date the statements are made. Except as required by law, Giant Mining Corp. undertakes no obligation to update these forward-looking statements in the event that management's beliefs, estimates or opinions, or other factors, should change.

Copyright (c) 2024 TheNewswire - All rights reserved.


Bewerten 
A A A
PDF Versenden Drucken

Für den Inhalt des Beitrages ist allein der Autor verantwortlich bzw. die aufgeführte Quelle. Bild- oder Filmrechte liegen beim Autor/Quelle bzw. bei der vom ihm benannten Quelle. Bei Übersetzungen können Fehler nicht ausgeschlossen werden. Der vertretene Standpunkt eines Autors spiegelt generell nicht die Meinung des Webseiten-Betreibers wieder. Mittels der Veröffentlichung will dieser lediglich ein pluralistisches Meinungsbild darstellen. Direkte oder indirekte Aussagen in einem Beitrag stellen keinerlei Aufforderung zum Kauf-/Verkauf von Wertpapieren dar. Wir wehren uns gegen jede Form von Hass, Diskriminierung und Verletzung der Menschenwürde. Beachten Sie bitte auch unsere AGB/Disclaimer!



Mineninfo
Giant Mining Corp.
Bergbau
A409DM
CA37452L1085
Copyright © Minenportal.de 2006-2024 | MinenPortal.de ist eine Marke von GoldSeiten.de und Mitglied der GoldSeiten Mediengruppe
Alle Angaben ohne Gewähr! Es wird keinerlei Haftung für die Richtigkeit der Angaben und der Kurse übernommen!
Informationen zur Zeitverzögerung der Kursdaten und Börsenbedingungen. Kursdaten: Data Supplied by BSB-Software.