Surge Copper Announces 96% Increase in Ootsa Measured & Indicated Resources to 439 Mt Grading 0.32% CuEq

Grows total Ootsa-Berg district inventory to over 1 billion tonnes of M+I resources

VANCOUVER, June 21, 2022 - Surge Copper Corp. (TSXV: SURG) (OTCQX: SRGXF) (Frankfurt: G6D2) ("Surge" or the "Company") is pleased to announce an updated mineral resource estimate ("MRE") for its Ootsa Property, comprising pit constrained resources at both the Seel and Ox deposits. This updated MRE is based on a drill hole database comprising approximately 152,000 metres of diamond drilling, including approximately 50,000 metres drilled since 2018. The MRE combines multiple mineralized zones at the Seel deposit area into a single pit constrained volume and demonstrates both the overall size of the mineral endowment at Ootsa, as well as the presence of near-surface, higher-grade subsets of the resource which could be evaluated in future studies as potential starter pits.

• Combined Total: pit-constrained resources of 439 Mt grading 0.32% copper equivalent^* ("CuEq") in the combined Measured and Indicated categories ("M+I"), representing a 96% increase in M+I resources compared to the previous 2016 estimate, plus an additional 138 Mt grading 0.28% CuEq in the Inferred category ("Inf."), comprised of:
• Seel Deposit: 380 Mt grading 0.32% CuEq M+I plus an additional 135 Mt grading 0.28% CuEq Inf.
• Ox Deposit: 59 Mt grading 0.32% CuEq M+I
• Total contained metal in the M+I categories of 1.7 Blbs Cu, 167 Mlbs Mo, 1.6 Moz Au, and 30 Moz Ag
• With the nearby Berg deposit, which hosts 610 Mt of M+I resources, this new resource at Ootsa brings Surge's total M+I inventory to over 1 billion tonnes, with total contained metal across the two projects of 5.3 Blbs Cu, 586 Mlbs Mo, 1.6 Moz Au, and 89 Moz Ag
• Actively derisking advanced resources through metallurgical testwork programs, long lead-time environmental monitoring, and internal engineering trade-off studies, while pursuing further discovery via drill testing and reconnaissance screening of over 20 regional exploration targets

To view an interactive 3D model that includes the results announced today use the following link or visit Surge's website:

https://vrify.com/decks/11738?auth=1d44f428-b9e3-468a-844b-b00cc4cbbe70

Leif Nilsson, Chief Executive Officer, commented: "Our objective with the drill campaigns in 2020-2021, and this resource estimate, were to determine the characteristics of a "super-pit" resource at Ootsa that would encompass various zones at Seel including the large mineralized zone at West Seel, the near-surface gold-rich zone at East Seel, and the high-grade Breccia Zone. This result demonstrates the significant overall size of the Seel system and the flexibility represented by the near-surface higher-grade zones, including the Breccia Zone which has seen an approximate quadrupling in size and remains open for further expansion. In a world that is starved of developable large-scale copper resources in safe jurisdictions, the Ootsa-Berg district is special due to its significant size potential and proximity to world-class mining infrastructure. With recent resource updates at both Ootsa and Berg now in place, and a 22,000 metre regional exploration program underway, we believe there is strong potential to drive value through discovery and continue to advance this premier Canadian copper district."

The Company is pleased with the significant gains achieved on the Ootsa Property over the past two years of focused exploration. This resource update has resulted in a 96% increase, compared to the previous 2016 estimate, in the M+I categories on the Ootsa Property and provides a solid foundation for advancing the project. Figure 5 below shows the resource tonnage within the M+I categories on the Ootsa Property by depth and highlights the presence of near-surface, higher-grade subsets of the resource which could be evaluated in future studies as potential starter pits. A technical report for this MRE prepared in accordance with NI43-101 will be filed within 45 days of this news release on SEDAR at www.sedar.com and the Company's website.

Next steps at Ootsa involve ongoing advanced metallurgical testwork, long lead-time environmental baseline monitoring programs, internal engineering trade-off studies focused on district-wide infrastructure options, and ongoing exploration. One drill is actively turning at the West Ox target on the Ootsa Property, and one additional drill is expected to arrive in late June, before remobilizing to test targets in the northern portion of the district (see Press Release dated June 1, 2022).

Table 1. Ootsa Mineral Resource Estimate by Classification at Base Case NSR Cut-off of C$8.27/t

Resource estimation was performed by James Gray of Advantage Geoservices Ltd., an independent Qualified Person as defined by National Instrument 43-101. Data from 300 core holes at Seel and 133 at Ox was used for estimation using Geovia GEMS software. Control for grade estimation in both deposits is based on three directional domains and a 0.1% CuEq mineralized domain. Mineralized versus background material was separated using an indicator (0.1% CuEq) estimation method. Grades were subsequently estimated by ordinary kriging inside and outside that mineralized zone. Copper, molybdenum, gold, and silver grades were estimated using capped assays composited to two-metre intervals. The estimation block size was 12x12x12 metres for both deposits. Average rock densities of 2.74 t/m³ and 2.70 t/m³ were applied to Seel and Ox, respectively, based on 4,081 measurements from Seel and 1,054 measurements from Ox. Overburden was assigned a density of 2.0 t/m³.

Blocks were classified based on spatial parameters related to available drill data as well as on the generation of an optimized pit. At both deposits, Measured resource blocks have a maximum nominal drill spacing of 40m and the third closest hole is within 60m of the block. Indicated blocks have a maximum drill spacing of 80m. Inferred blocks are the remainder estimated within the pit volume. The resource was constrained by a Whittle generated (3DS Geovia) pit for which the optimization parameters used are included in Note 2 of Table 1. Including 2% dilution the resource NSR cut-off is C$8.27/t.

The Company anticipates updating the market on results from the following activities:

• Results from the West Seel metallurgical testwork program
• Exploration updates throughout the 2022 field program

All drill core is logged, photographed, and cut in half with a diamond saw. Half of the core is bagged and sent to ISO/IEC 17025 accredited assay labs in British Columbia, while the other half is archived and stored on site for verification and reference purposes. Gold is assayed using a 30g fire assay method and 33 additional elements are analyzed by Induced Coupled Plasma (ICP) utilizing a 4-acid digestion. Drill hole assay samples are monitored through a quality control quality assurance (QAQC) program that includes the regular insertion of blanks, duplicates, and standards that are subsequently checked by a qualified person to ensure proper quality assurance and quality control. Jacques R. Stacey, P.Geo, has worked on the Ootsa Property over the past two years and has verified drilling procedures, drill hole locations, the drill hole database, assay certificates, and QAQC results.

The Qualified Persons for the MRE are James N. Gray, P.Geo, of Advantage Geoservices Ltd. and Jacques R. Stacey, MSc., P.Geo, of Northern Mountain Geosciences, both independent of the Company and Qualified Persons as defined under National Instrument 43-101. James Gray is responsible for the mineral resource estimate and Jacques Stacey has worked extensively on the project, has visited the site, and has reviewed the drill hole database, assay certificates, and quality control procedures. Both Qualified Persons have reviewed and approved the technical disclosure contained in this news release. The Qualified Persons are not aware of any known environmental, permitting, legal, title-related, taxation, socio-political, marketing, or other relevant issues that could materially affect the mineral resource estimate.

The Berg mineral resource estimate has been completed by Tetra Tech in accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects. The mineral resource estimate has been prepared by Cameron Norton, P.Geo., Independent Qualified Person as defined by National Instrument 43-101, and has an effective date of March 9, 2021.

The Company owns a 100% interest in the Ootsa Property, an advanced stage exploration project containing the East Seel, West Seel and Ox porphyry deposits located adjacent to the open pit Huckleberry Copper Mine, owned by Imperial Metals. The Ootsa Property contains pit constrained NI 43-101 compliant resources of copper, gold, molybdenum, and silver in the Measured and Indicated categories.

The Company is also earning into a 70% interest in the Berg Property from Centerra Gold. Berg is a large, advanced stage exploration project located 28 km northwest of the Ootsa deposits. Berg contains pit constrained 43-101 compliant resources of copper, molybdenum, and silver in the Measured and Indicated categories. Combined, the adjacent Ootsa and Berg properties give Surge a dominant land position in the Ootsa-Huckleberry-Berg district and control over four advanced porphyry deposits.

"Leif Nilsson"
Chief Executive Officer

Twitter: @SurgeCopper
LinkedIn: Surge Copper Corp.
https://www.surgecopper.com

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

This News Release contains forward-looking statements, which relate to future events. In some cases, you can identify forward-looking statements by terminology such as "will", "may", "should", "expects", "plans", or "anticipates" or the negative of these terms or other comparable terminology. All statements included herein, other than statements of historical fact, are forward looking statements, including but not limited to the Company's plans regarding the Berg Property and the Ootsa Property. These statements are only predictions and involve known and unknown risks, uncertainties and other factors that may cause the Company's actual results, level of activity, performance, or achievements to be materially different from any future results, levels of activity, performance, or achievements expressed or implied by these forward-looking-statements. Such uncertainties and risks may include, among others, actual results of the Company's exploration activities being different than those expected by management, delays in obtaining or failure to obtain required government or other regulatory approvals, the ability to obtain adequate financing to conduct its planned exploration programs, inability to procure labour, equipment and supplies in sufficient quantities and on a timely basis, equipment breakdown, impacts of the current coronavirus pandemic, and bad weather. While these forward-looking statements, and any assumptions upon which they are based, are made in good faith, and reflect the Company's current judgment regarding the direction of its business, actual results will almost always vary, sometimes materially, from any estimates, predictions, projections, assumptions, or other future performance suggestions herein. Except as required by applicable law, the Company does not intend to update any forward-looking statements to conform these statements to actual results.

SOURCE Surge Copper Corp.



Contact
Riley Trimble, Corporate Communications & Development, Telephone: +1 604 416 2978, Email: info@surgecopper.com