Los Andes Copper Ltd. Announces Results of Metallurgical Testwork Show Improvements from Historical Work

Key findings:

• Overall copper recoveries remain at over 90% using a coarser grind size when compared to historical test work

• Rock competence (hardness) and resulting energy consumption is in line with similar deposits in Chile

• Coarser grind size reduces power requirements, improves water recovery, and increases throughput in the mills — the optimization will be captured in the Company's anticipated Q1 2018 preliminary economic assessment ("PEA")

Antony Amberg, President & CEO of Los Andes, commented:

"We are delighted with the results of our recent metallurgical test work. The Company has been able to show that given the nature of the deposit, we are able to recover over 90% of contained copper at significantly coarser grinding levels.

"This reduction in grinding for the rougher flotation stage would result in a decrease in the power and water consumption of the project. These reductions could have significant effects in mill throughput and operating costs, as well as help reduce the environmental footprint of the project.

"We look forward to providing further information in our forthcoming Q1 2018 updated PEA following our expected 43-101 resource update in January 2018 as we continue to progress the Vizcachitas project."

Metallurgical Test work

Sample Selection/Head Characterization

Forty samples were selected from the 2015/2016 and 2017 drilling campaigns, from an area of 676 metres East-West x 682 metres North-South with an elevation ranging between 1176 and 1994 metres. Head grades for the samples averaged 0.48% Cu and 0.022% Mo. Four predominant rock types were identified (Andesite, Breccia, Diorite and Tonalite) in combination with five alteration types (Biotite, Chloritic, Qtz-Ser, Ser-Cl and Si-Ser).

The predominant copper bearing sulfide species is chalcopyrite although a minor presence of bornite, covellite and chalcocite was observed in samples located in the andesitic/surface zone of the orebody.

Grindability

SAG mill and ball mill grindability tests showed relatively competent andesitic and dioritic samples, whereas the tonalitic and breccia samples require less energy. The tonalitic mineralization is relatively abrasive with respect to the other three rock types.

Bond mill work index averages 12.0 kWh/st for the 40 samples, and the Starkey SAG mill grindability test gave an average result of 67 minutes. Hardness for SAG grinding is comparable to similar orebodies in Chile, whereas ball mill hardness is slightly lower.

Flotation

Rougher stage recoveries were determined for a grind size (P80) that ranged from 150 to 240 microns, consistent with recommendations and observations from the previous PEA in 2014. Individual rougher stage recoveries for Cu show a minor decrease from 98% at 150 microns to 95% at 240 microns. For the cleaner flotation stage, three composite samples were used representing different sections of the deposit.

Overall (rougher + cleaner) Cu recovery was determined in locked cycle tests at a rougher grind size (P80) of 240 microns. All three composite samples achieved an overall Cu recovery over 94%.

The relatively small decrease in recovery that is observed when comparing finer with coarser grind size in the rougher stage, warrants further test work with an even coarser grind up to 300 microns. It should be noted that several existing mills currently operate in this range and it is expected that this reduction in grinding for the rougher flotation stage would result in a decrease in the power and water consumption of the project. These reductions could have significant effects in mill throughput and operating costs, as well as help reduce the environmental footprint of the project.

Additional tests are currently underway with the objective of confirming final product grade and recovery for both Cu and Mo.

Resource update and PEA

The Company has been working with its consultants to collate the results of its recent drilling programmes into an updated 43-101 resource estimate. The Company anticipates publishing this in January 2018 which will allow the Company to rapidly advance work on a revised PEA for the project. The PEA is expected to be published in Q1 2018.

Ms. Romke Kuyvenhoven MSc MBA is the Qualified Person under NI 43-101 who supervised and approved the scientific and technical disclosure in this news release. Ms. Kuyvenhoven is a mining engineer with a master's degree in mining and petroleum engineering with specialization in extractive metallurgy from Delft University of Technology, the Netherlands. She also has an MBA from Universidad de Chile & Tulane University (double degree). Ms. Kuyvenhoven has almost 20 years of experience in metallurgy; working in engineering, consulting and research for projects in Chile, Peru, Brazil, South Africa, Zambia and Canada. She began her career in 1998, working for Hatch as project metallurgist. In 2001 she joined SGS Lakefield as metallurgy manager. She later worked for Aminpro and Gecamin before before becoming an independent consultant in 2013 working with Empirica Consultores. In addition to the consulting work, over the last seven years Ms. Kuyvenhoven has been a professor of mineral processing for metallurgical and chemical engineering students at the Universidad Tecnica Federico Santa Maria.

For more information please contact:

Antony J. Amberg, President & CEO
Tel: +56 2 2954-0450

Aurora Davidson, CFO
Tel: 604-697-6207

E-Mail: info@losandescopper.com or visit our website at: www.losandescopper.com

About Los Andes Copper Ltd.

Los Andes Copper Ltd. is a Canadian exploration and development company focused on the acquisition, exploration and development of advanced stage copper deposits in Latin America. The Company owns 100% of the Vizcachitas project in Chile, the largest copper deposit in the Americas not controlled by the majors. Vizcachitas is a copper-molybdenum porphyry deposit, located 120 km north of Santiago, in an area of very good infrastructure.

Los Andes Copper Ltd. is listed on the TSX-V under the ticker: LA.

Certain of the information and statements contained herein that are not historical facts, constitute "forward-looking information" within the meaning of the Securities Act (British Columbia), Securities Act (Ontario) and the Securities Act (Alberta) ("Forward-Looking Information"). Forward-Looking Information is often, but not always, identified by the use of words such as "seek", "anticipate", "believe", "plan", "estimate", "expect" and "intend"; statements that an event or result is "due" on or "may", "will", "should", "could", or might" occur or be achieved; and, other similar expressions. More specifically, Forward-Looking Information involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the Company, or industry results, to be materially different from any future results, performance or achievements expressed or implied by such Forward-Looking Information; including, without limitation, the achievement and maintenance of planned production rates, the evolving legal and political policies of Chile, the volatility in the Chilean economy, military unrest or terrorist actions, metal and energy price fluctuations, favourable governmental relations, the availability of financing for activities when required and on acceptable terms, the estimation of mineral resources and reserves, current and future environmental and regulatory requirements, the availability and timely receipt of permits, approvals and licenses, industrial or environmental accidents, equipment breakdowns, availability of and competition for future acquisition opportunities, availability and cost of insurance, labour disputes, land claims, the inherent uncertainty of production and cost estimates, currency fluctuations, expectations and beliefs of management and other risks and uncertainties, including those described in Management's Discussion and Analysis in the Company's financial statements. Such Forward-Looking Information is based upon the Company's assumptions regarding global and Chilean economic, political and market conditions and the price of metals and energy, and the Company's production. Among the factors that have a direct bearing on the Company's future results of operations and financial conditions are changes in project parameters as plans continue to be refined, a change in government policies, competition, currency fluctuations and restrictions and technological changes, among other things. Should one or more of any of the aforementioned risks and uncertainties materialize, or should underlying assumptions prove incorrect, actual results may vary materially from any conclusions, forecasts or projections described in the Forward-Looking Information. Accordingly, readers are advised not to place undue reliance on Forward-Looking Information. Except as required under applicable securities legislation, the Company undertakes no obligation to publicly update or revise Forward-Looking Information, whether as a result of new information, future events or otherwise.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.