Santa Barbara Drills 50 m @ 1.10 g/t Gold, Including 24 m @ 1.71 g/t Gold and 98 Metres @ 0.51 g/t Gold at the Sancos Project, Peru

Santa Barbara Resources Ltd. (TSX-V: SBL - “Santa Barbara” or the “Company”) is pleased to report results from 27 holes drilled on the Sancos Project in September and October 2013. The planned 5,000 metre (m) reverse circulation drill program was increased to 6,000 m by agreement with joint venture partner Rio Alto Mining Ltd. (“Rio Alto”).

Drill holes have returned gold intercepts of 50 m @ 1.10 grams per tonne (g/t) gold, including 24 m @ 1.71 g/t gold at shallow depth, 98 metres @ 0.51 g/t gold near surface, 140 m @ 0.36 g/t gold from surface and 108 m @ 0.38 g/t gold from surface. Drill hole SARC 040 with the drill intercept of 50 m @ 1.10 g/t gold is located approximately 120 m north of and at similar altitudes to the area of highest grade trench results obtained from surface in prior work programs. The other drill holes, in conjunction with the results of the first drill campaign which included 154 m @ 0.45 g/t gold and 94 m @ 0.47 g/t gold from surface as well as seven other adjacent drill holes, form a coherent cluster of drill intercepts within the central breccia zone of Sancos Central in an area measuring 500 m by 160 m. The gold mineralization in this zone remains open at depth.

Nine out of twelve of the other drill holes intersected anomalous gold values throughout Sancos Central ranging from 14 m @ 0.19 g/t gold to 116 m @ 0.17 g/t gold. The 2 m @ 2.35 g/t gold intersection in SARC 033 may indicate the presence of a potential feeder structure at Sancos Northeast. The interpretation of these results is ongoing.

The most significant drill results are summarized in the table below. A map with the drill hole locations and complete drill results can be reviewed on the Company´s web page.

Christoph Lassl, CEO of the Company commented: “We are very pleased with the results received from our recent drill program at Sancos. The better drill intercepts located to the north of the previously outlined highest grade gold zone in trenches are found at similar elevation, suggesting the continuation of potentially flat-lying, lithilogically controlled gold mineralization. Defining the extent of a potential better grade gold zone will require a follow-up drill program. The central breccia complex of Sancos Central has returned contiguous drill holes with long, potentially economic gold intercepts from surface or near surface.”

Sampling, Quality Control and Drill Intersection Grade Calculation

During the drill program, one sample was collected for each two metre drill advance. To guarantee accurate representation of the lithology in the sample, the entire sample recovered from the corresponding drill interval was riffle-split to a 3 kg to 5 kg sample, weighed on site, sealed and labeled immediately in preparation for shipment to the assay laboratory. The remaining drill cuttings are stored on site.

Dill Hole		Hole Length		From (m)		To (m)		Mineralized		Grade		Oxide /
		(m)						Interval (m)		(g/t)		Sulphide
SARC 025*		178		0		108		108		0.38		Oxide
		Including		98		108		10		1.09		Oxide
		And		108		178		70		0.10		Oxide
SARC 026		250		0		140		140		0.36		Oxide
		And		140		186		46		0.18		Oxide
SARC 027*		230		6		24		18		0.25		Oxide
		And		24		122		98		0.51		Oxide
		Including		44		60		16		0.89		Oxide
		And		122		230		108		0.16		Oxide
SARC 028		230		40		48		8		0.49		Oxide
SARC 033		250		156		158		2		2.35		Oxide
SARC 035		216		66		94		28		0.48		Oxide
SARC 036		250		90		120		30		0.30		Oxide
		And		150		170		20		0.28		Oxide
SARC 037		200		62		92		30		0.46		Oxide
		And		122		128		6		0.75		Oxide
		And		150		170		20		0.50		Oxide
SARC 039		200		28		78		50		0.40		Oxide
SARC 040		250		48		98		50		1.11		Oxide
		Including		72		96		24		1.71		Oxide
SARC 041		250		56		120		64		0.36		Oxide
SARC 042		200		102		142		40		0.38		Oxide
SARC 045		200		108		130		22		0.34		Oxide
SARC 048		200		0		16		16		0.51		Oxide
		And		20		102		82		0.23		Oxide
SARC 051		194		48		144		96		0.23		Oxide
* Holes SARC 025 and SARC 027 end in mineralization

Sancos RC Drilling - Drill Hole Specifications
Hole		Easting WGS84		Northing WGS 84		Elevation (m)		Azimuth		Dip		Depth (m)
SARC-025		615542		8335954		3756		30		-60		178
SARC-026		615468		8335972		3764		135		-60		250
SARC-027		615491		8336036		3798		180		-60		230
SARC-028		615616		8335857		3719		315		-60		230
SARC-029		615157		8335833		3605		30		-75		260
SARC-030		615089		8335799		3564		30		-75		250
SARC-031		615193		8335769		3591		30		-60		246
SARC-032		615274		8335750		3566		30		-60		250
SARC-033		615936		8336642		3794		300		-60		250
SARC-034		615896		8336496		3720		300		-60		250
SARC-035		615728		8336213		3733		210		-60		216
SARC-036		615663		8336036		3755		30		-60		250
SARC-037		615604		8335966		3753		30		-60		200
SARC-038		615465		8335977		3764		315		-60		200
SARC-039		615517		8335866		3700		315		-60		200
SARC-040		615312		8335869		3661		0		-90		250
SARC-041		615243		8335887		3662		0		-90		250
SARC-042		615619		8336084		3776		0		-60		200
SARC-043		615575		8336145		3809		220		-60		226
SARC-044		615415		8336092		3818		0		-60		200
SARC-045		615680		8336260		3735		220		-60		200
SARC-046		615499		8336253		3833		180		-60		210
SARC-047		615577		8335785		3658		315		-60		160
SARC-048		615493		8335835		3666		315		-70		200
SARC-049		615420		8336089		3813		190		-60		250
SARC-050		615465		8335973		3758		225		-60		200
SARC-051		615370		8335874		3654		270		-60		194

The samples were prepared and fire assayed with an atomic adsorption finish using a 50 gram assay charge. All samples were analyzed by a 36 element aqua regia ICP-OES method. The samples were also analyzed for trace mercury detection by cold vapour. All sample preparation and analytical procedures were conducted by CERTIMIN S.A., Lima, Peru.

CERTIMIN, S.A. quality control system complies with International Standards ISO 9001:2008 and ISO 17025:2006. Analytical accuracy and precision are monitored by the analysis of reagent blanks, reference material and replicate samples. As part of Santa Barbara’s Quality Control and Quality Assurance program, certified reference materials, field duplicates and blank samples are inserted continuously into the sample stream.

The average grade of a drill interval is calculated by a weighted average of the contained sample results. Selective higher grade portions of the respective interval are reported within wider general mineralization. Drill intercepts presented above are drill intersection widths and may not represent true widths of mineralization, which cannot yet be determined. Gold assays have not been subject to a top cut.

The technical content of this news release has been reviewed by Stewart Wallis P.Geo., consultant to the Company, who is a Qualified Person as defined by National Instrument 43-101.


Option and Joint Venture Agreement

Under the terms of the Option and Joint Venture Agreement, Rio Alto has the option to acquire an initial 51% interest in the Sancos Project within a three year period by incurring an aggregate of US$4.5 million expenditures on the Sancos Project and may earn an additional 15% interest in the Sancos Project within the subsequent two year period by undertaking all necessary actions required to prepare the Sancos Project for a production decision. Rio Alto will also make certain cash payments to Santa Barbara. Once Rio Alto earns 66 % Santa Barbara may elect to participate proportionally in the costs of the development and construction of a mine on the Sancos Project and maintain its interest in the Sancos Joint Venture at 34%, or allow Rio Alto to arrange for project financing for mine construction, including Santa Barbara's proportional share, in which case Rio Alto will have acquired an additional 9% interest in the Sancos Project, leaving Santa Barbara with a 25% interest in the Sancos Project.

Further details of the Agreement can be found in the Company’s News Release dated June 27, 2013.


Sancos Project

The Sancos Project is located in the mining-friendly Ayacucho Region of Peru. The property hosts a large high-sulphidation epithermal gold-silver mineralized system. The Sancos Project encompasses 8,200 hectares, with 2,000 hectares held directly by Santa Barbara. Santa Barbara has the option, subject to certain back-in rights, to acquire a 100% interest in the remaining 6,200 hectares of the Sancos project from Barrick Gold’s Peruvian subsidiary (the “Barrick Option”). The terms of the Barrick Option, including Barrick’s back-in right in certain circumstances, are described in the notes to the annual financial statements of Santa Barbara. During the term of the Rio Alto Agreement, Rio Alto will fund Santa Barbara to make cash payments due to Barrick pursuant to the Barrick Option. If Barrick exercises its back-in right after Rio Alto has earned an interest, Santa Barbara and Rio Alto will be diluted pro rata and the back-in purchase price, of three times each parties’ expenditures on the Sancos Project, will be paid proportionally to their participation in the Project at the time of exercise of the Barrick back-in.


About the Company

Santa Barbara is a South American mineral explorer focusing on Peru and Chile. The Company has 25.3 million shares outstanding.


ON BEHALF OF THE BOARD

“Christoph Lassl”
Christoph Lassl, President and Chief Executive Officer



Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

This news release contains certain statements that may be deemed “forward-looking” statements. Forward looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects”, “plans”, “anticipates”, “believes”, “intends”, “estimates”, “projects”, “potential” and similar expressions, or that events or conditions “will”, “would”, “may”, “could” or “should” occur and include, without limitation, statements regarding the Company’s plans with respect to exploration activities and a statements about potential economic gold mineralization on the Sancos Project. Although Santa Barbara believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results may differ materially from those in forward looking statements, including the risk that Rio Alto will not proceed with the exercise of the option and the funding of exploration activities on the Sancos Project. Forward looking statements are based on the beliefs, estimates and opinions of the Company’s management on the date the statements are made. Except as required by law, the Company undertakes no obligation to update these forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.



Contact

Santa Barbara Resources Ltd.
Christoph Lassl, President and Chief Executive Officer
56-9-81490442
christoph@sbr-ltd.com